Hydroponics for Kids: Build a 2 Liter Bottle Garden

Hydroponics for Kids: Build a 2 Liter Bottle Garden

Contents

I was chatting with Charlotte, a subscriber on the Epic Gardening YouTube channel, and she had a REALLY good idea:

​Actually, it would be kinda cool if you had a page on the site for kids….. school projects and such for hydroponics.

I homeschool 5 kids, and this would be a pretty cool science project. How to do it on the cheap (most homeschoolers sacrifice a parent’s income to homeschool). Something say a 3rd or 4th grader could put together and get big results. Not a bad school project either! – Charlotte

Why didn’t I think of this before!

Oh well, big thanks to Charlotte for the suggestion for this project!

Before we get into the written guide, here’s a video overview:

YouTube video

Hydroponic Gardens: A Great Experiment For Kids

As a kid, I remember growing a bean plant in school. It was 3rd grade and I vaguely remember the lessons that the teacher was trying to convey…but if you asked me for details today, I wouldn’t be able to tell you any. Looking back, this was for a few reasons:

  1. I didn’t connect growing the plant to growing food
  2. I didn’t see the final product (we didn’t grow the plant to the point where it produced new beans)
  3. It just wasn’t that cool – it was a bean in a cup with some of that old green foam they use for floral arrangements (you know the kind)

For this tutorial, I wanted to put together a guide that solves all three of those problems for your child…something I would have loved back in third grade!

What Your Child Will Learn

The Growth Cycle of a Plant

From germination, to seedlings, to vegetative growth, all the way to harvest – this guide shows kids the full lifecycle of a plant.

What Plants Need to Grow

By growing in a hydroponic environment, the “cloak” of using soil is removed – kids will learn how proper nutrition, water, and light help a plant to thrive.

Where Food REALLY Comes From

No longer will food be something that just magically shows up on their plates. By growing edible leafy greens, your child will learn exactly what happens before the food they eat hits their mouths every meal.

P.S. If your child doesn’t like eating veggies, this is an especially good project for them…kids seem to “magically” want to eat lettuce and spinach after they grow it themselves. Funny how that works…

The Materials You’ll Need

This is a pretty simple project, so don’t be scared off by the materials list.  You can find most of it lying around the house.  For the few specialty items, Amazon or a local garden store will work just fine!​

Let’s start you out with your shopping list:

  • 2-liter bottle
  • Growing media (we recommend coconut coir)
  • Water
  • Wicks or a wicking material
  • Aluminum foil
  • Nutrients
  • Permanent marker or sharpie
  • Scissors
  • Seeds
  • Duct Tape (optional)
  • Optional: pH test kit
  • Optional: Seed starters

Materials Breakdown

2 Liter Bottle

A container of some kind is needed to house the water and nutrient mixture. Grab any 2 liter bottle that’s lying around, or pick up a cheap $1 bottle of club soda and either empty it out or drink it if you don’t already have a 2 liter bottle around the house.

Personally, I have a weird addiction to club soda, so I had a couple bottles lying around the house for this project!


Growing Media

cocobrick

You will need something for your plant’s roots to sit in and hold on to if you want to grow a healthy plant.

I highly recommend using coconut coir, which we sell here at the Epic Gardening shop. It’s a natural, sustainable hydroponic growing material that’s really cheap.

If you want to try something else, use larger-sized growing media so it doesn’t fall through the hole in the bottle. Gravel, expanded clay pellets, or lava rock are all good choices. Take a look through our hydroponic growing media guide for more insight on some of these alternatives.


Wick Material

wicks

We’ll be using the wick method to get water and nutrients up to the plant’s roots, so you’ll need some material for this. Felt or cotton towels are best for this. I typically cut up a washcloth into a strip and use that.

If you want to get fancy, you can use tiki torch replacement wicks, but they’re not necessary – grabbing some cloth from around the house works just fine!


Water

water from the tap

Water straight out of the tap is ok, as long as you let it sit out overnight if your water is chlorinated. Giving it 24-48 hours of airing-out time allows the chlorine to evaporate. Distilled, filtered, or reverse osmosis water will also work!


Aluminum Foil

aluminum

If you don’t cover the bottom of the 2-liter bottle with something opaque, light will shine into it and your garden will start growing algae in the water reservoir – no good! Aluminum foil helps to block out the light.


Seeds

imgres

For this experiment, it’s best to choose a fast-growing, leafy vegetable so your child can see progress really fast. Don’t pick anything that needs to fruit to be edible (beans, tomatoes, etc). Any lettuce, spinach, or basil variety is a great choice.

Recommended Varieties: Black Seeded Simpson or Genovese Sweet Basil


Nutrients / Fertilizer

nutrients

For your plant to grow successfully to a harvestable stage, you’ll need some nutrients. Because you’re only growing a plant in the vegetative phase, you can use something like General Hydroponics Flora Grow and get amazing results.


pH Kit (Optional)

ph

Most plants need water to be a bit lower pH than typically comes out of your tap. While it’s not 100% necessary for this experiment, your plant will grow better if you pick up a cheap pH Control Kit to adjust your water down to a ~6.5 pH. Products like pH Down will help you to stabilize your water quality.


Seed Starters (Optional)

rapid rooter

Depending on the growing media you chose, you may need something to start your seed in so it takes root successfully. I personally like Rapid Rooters, though you can also use Rock Wool Cubes or even make your own DIY Seed Cubes if you want to save some money and have some more fun with your kid!


Step 1: Prepare 2 Liter Bottle

Draw a Line

Step 1 - Draw a Line

Rinse out the bottle to remove any residue of whatever drink was in there before it was empty.

Take your 2 liter bottle and draw a line around it right where the curve ends and the bottle transitions to a straight line. It’s important to draw the line below the curved area, so you have enough space to grow your plant!

Cut The Bottle

step-two

Next, cut across the line, making sure to cut as straight as possible. Then flip the top over. Pretty simple, right? Now you’ve got the basic structure of the system built.

If you happen to have a roll of duct tape in the house, you can even secure the two sides together and cover the rough plastic at the top. This is especially useful if you have jagged edges along the top, as you’ll stop yourself from getting cut on the plastic. If you do this, make sure you prepare your water first, and be prepared to replace the duct tape whenever you need to add more nutrients and water.

The upper area is where your growing media and seed will go, and the bottom section houses the water and nutrient mixture. A wick will be fed through the hole… but before we get to that, we have to prepare the water.

Step 2: Prepare The Water

Treat Your Tap Water

Note: pHing your water is optional, but it’s highly recommended not only for helping your kid’s plant grow better, but also for teaching him/her some really cool principles about chemistry and WHY a plant needs water with a lower pH than what we typically drink.

beforeph

​Now that we have built our simple 2 Liter Garden, we need to pH the water and add nutrients. Most tap water is in the 7.0-8.0 range. The plants you will be growing need water with a pH in the 6.0-6.5 range, so you will need to use some pH down. The picture to the left shows the forest green color of average tap water in the 7.0-8.0 range.

pH down is highly corrosive, so be sure not to get it on any part of your body. You don’t need much to adjust the water – try a drop to start. Mix it into the water thoroughly and then test again. When the color matches the 6.0-6.5 range like the picture below, you’re ready to mix the nutrients.

afterph

It can take a while to get the color just right – try not to get frustrated. This is one of the most important steps in making sure that your plants get all of the nutrients that they require for vigorous growth. If you don’t correctly adjust pH, you will prevent your plants’ roots from absorbing certain nutrients.

Learn More: How pH interacts with nutrient uptake

Add Nutrients

addingnutrients

Now we need to remember how much water we added to the reservoir. Take a look at the nutrient mixing chart on the back of your bottle of nutrient solution. This will give you the exact amount to mix into your system.

Learn More: Hydroponic Nutrients Guide – What Plants NEED To Grow

After you prepare your water, pour it into your 2 liter bottle until it reaches the point where the cap would touch, then move on to the next step!

Step 3: Add Wick and Growing Media

Add The Wick

addwick

Take your wick and thread it through the cap hold in the 2 liter bottle. Pull it through to around 2/3 of the height of the smaller growing area.

You want it to be high enough so that when your seeds sprout, the roots won’t have to travel far to get to the wick area (where your growing media is moist and filled with nutrients.

Prepare Your Growing Media

addmedia

If you decided to use coconut coir, this step is simple: all you need to do is add some water to your coco coir brick, which will hydrate it and expand it to around 5 times its original size. Drop a few handfuls into your bottle, making sure the wick is in the center of the media.

If you are using another type of media, repeat the process, but don’t add extra water!

The cube in the middle is a Rockwool Cube, used to start seeds outside of the system

Step 4: Plant Your Seeds!

handful-of-seeds

Now comes the fun part – planting your seeds. Grab your packet of seeds and pour a small amount out in your hand.

Pick three or four seeds and clump them together on the tip of your finger. Now, you might be thinking:

“Why am I planting 3-4 seeds if I’m only growing one plant?”

It’s a good question! The reason we do this is because of germination rates. A seed does not have a 100% chance of sprouting…usually it’s anywhere from 80-95% for fresh seeds for most common varieties.

We plant 3-4 seeds in one hole to increase the odds that we get at least one that sprouts – it’d be a shame to wait 5-7 days only to have your seed not sprout – so avoid that problem altogether by planting a few!

Follow the directions on the seed packet to figure out how deep to plant your seeds – usually it’s 1/4thto 1/8th inches below the growing media. Make sure to cover them up with a little coconut coir so they’re in a dark environment.

Using a Different Growing Media?

If you’re using a larger growing media (pebbles, lava rock, expanded clay pellets), then you’ll need a seed starter like a Rapid Rooter or Rockwool Cube to get the seed started. See the materials section for more information.

three-seeds
seeds-planted

Finished Product

final-2-liter

Congratulations, you’re now the proud owner of a really awesome 2 Liter Hydroponic Garden that will produce a head of lettuce, spinach, or some tasty basil within a few weeks! Read on for some important details on taking care of your garden.

Why Is There Aluminum Foil Around The Bottle?

If you want to be absolutely sure of the health of your garden, you’ll want to encase the 2-liter bottle in something opaque. Aluminum foil works well.

Why? Plants aren’t the only organisms that like water, nutrients, and light – algae does too. If you let too much light hit the nutrient reservoir, you might find that you get some nasty visitors that will make your garden look gross and smell a little weird.

Maintenance

This garden is really easy to take care of. Just follow the guidelines below with your child and you’ll have a healthy plant!

Plant Details

Here’s a list of plants that I would recommend trying with your child for this garden:

PlantsGerminationSeedlingHarvest
Basil5-10 days2 weeksAs leaves mature
Lettuce7-10 days2 weeksAs leaves mature
Spinach7-14 days2 weeksAs leaves mature

In my example garden, I planted Black Seeded Simpson lettuce. If I had to recommend a particular plant, I would go with lettuce – it’s easy to grow, fast-growing, and most kids will eat it… especially after they’ve grown it themselves!

Germination

Once your seeds begin to sprout, you will need to thin your seeds. Because you planted 3-4 seeds, you will usually have at least 2-3 that sprout up.

This garden is designed for only one plant – so you’ll need to clip off the weakest looking seedlings with a pair of scissors…leaving only the healthiest seedling.

Every seed has a chance of not sprouting, so by planting 3-4 seeds at a time we lower the chances that we don’t get any seeds to germinate.

Lighting

Place your garden in an area that gets as much natural sunlight as possible. Ideally, you want an area that’s getting at least six hours a day.

If you can’t find a spot in your home that fits these requirements, you may want to consider lighting it artificially. A compact fluorescent bulb (CFL) will work just fine for lettuce, basil, or spinach.

Make sure that your plants get no less than six hours of sun per day, supplementing with lights if you can’t get this much light naturally.

Watering

Taking care of your 2 Liter Garden is simple. All you have to do is make sure that you keep the water at the correct level.

As your plant grows, it will suck up water and nutrients, so keep some properly prepared nutrient mixture ready to fill it back up to normal levels when the reservoir drops.

Harvesting

The best part about setting up a 2 Liter Garden is the fact that you can harvest all of the time!

Have your child cut off the outer spinach, lettuce, or basil leaves and leave the smaller, less developed leaves to grow. You can keep harvesting over and over for at least a month using this method!

Share This Post